hisky HMX280, Инструкция по эксплуатации

Страница: 6 / 10

8 9
6 . Install the rotors
6 . 1 Installation Procedure of the motors
Step1 Step2
Step3
步骤 4
Step4
Fasten the bullet head with the screwdriver Do the other three rotors same as the above
（ see the above picture) Rotors of M1 and M2 are orange.
M1 is counter-clockwise rotor, while M2 is clockwise rotor.
Rotors of M3 and M4 are black. M3 is counter-clockwise rotor. M4 is clockwise rotor.
M1 and M3 rotors are counter-clockwise. The direction of leading edge is counter-clockwise,
M2 and M4 rotors are clockwise. The direction of leading edge is clockwise,(see the
The quad cannot fly if place the wrong rotors
1)Unscrew the bullet head with screwdriver;
2)Install the clockwise rotors to M2 and M4 motors;
3)Install the counter-clockwise rotors to M1 and M3 motors.
Unscrew the bullet head on the motors
with the cross screwdriver Don’t mistake the up or down side of
the rotor as down or up side.(The side
with 2 dots besides the hole is the up
side, while 4 dots is the down side.)
3 steps
(see the following picture)
Leading edge
Leading edge
following picture)
at the motors.Please ensure the rotors of
clockwise and counter-clockwise are loaded
accordingly.
M1
M2
M3
M4
Orange rotors
Black rotors
Orange rotors
Black rotors
* Note: