Load the items to be washed in the drum. Add the detergent
into the relevant compartments for the type of program you
are going to select, see the Detergent Compartment section
on page.
1.Press the
On/Off
button.
2.Rotate the selector dial to the required program.
3.The display window will show the program length (hours :
minutes), temperature, spin speed and additional function
options.
4.The recommended temperature and spin speed will flash on
the display. Press the
Temp.
button to set the desired wash
temperature and the
Spin
button to select the spin speed.
To change, or add any of the functions, press the respective
button and the display will flash. Press the button again until
the chosen option flashes and then press
Select
.
Prewash
Press the
Option
button until the Prewash icon flashes and
press
Select
. Add detergent into the Prewash compartment
of the detergent drawer.
Eco wash
Press the
Option
button until the Eco icon flashes and press
Select
. This function is designed to reduce the amount of
electricity, water used and save time during the program.
The Eco icon will light up.
PARAMETER
Washing Capacity
Max.spin speed
Net Weight
Dimension(WXDXH)
Rated Voltage
Heating Power
Washing Power
Model
10.0kg
1400rpm
78kg
595X660X845mm
220V-240V
1900W
100W
WF(B)P1014V/WF(B)P1014VS/
WF(B)P1014VB
clothing suspended in water after the last rinse, to prevent
the fabrics from creasing. To spin the clothing, and complete
the program, press the
Start / Pause
button. The items can
then be removed straight away after the program has finished.
Rinse hold
Press the
Option
button until the Rinse Hold icon flashes
and press
Select
. Selecting this function will keep the
Night wash
•
Decrease final dewatering rotational speed to reduce noise.
•
Cancel all buzzer sounds, except alarm sound.
•
Crease Care function will be selected automatically
when Night wash function is selected.
Memory
•
When Memory function is selected, parameters of current
program will be memorized after this program starts to operate.
•
After memory parameters are saved, memory function needs
to be selected to recall the parameters which have been saved.
•
If you wish to change your favorite settings, it is necessary
to select memory function as well to save your new settings.
After you have selected your options and placed detergent
within the dispenser box, turn on the water tap and press the
Start / Pause
button. The screen will display the current
program progression with icons from left to right. It also
displays the remaining program time.
Select Delay after you have selected the program and other
options.
• Press the
Delay
button once and the delay time will increase
by 30 minutes. Press and hold the button and the delay time
will increase by 30 minutes every 0.4 seconds. The delay time
can be programmed for between 30 minutes to 24 hours.
• The delay time must be longer than the wash program length
as the delay time is the time the program will finish.
For example: if the selected program time is 02:28, the delay
time selected must be between 02:30 and 24:00.
• After the delay time has been selected
,
press the
Start /Pause
button and the display will start to count down. When the delay
time is down to the program length time the Delay icon will go
out and the program will start.
• To cancel the delay time, after the
Start /Pause
button has
been pressed, but before the program has started, it will be
necessary to press the
On/Off
button and turn the washing
machine off.
• The Delay function is not available for Drum clean 95°C
programs.
Intensive wash
Press the
Option
button until the Intensive Wash icon
flashes and press
Select.
This function will prolong the wash
time with a more intense wash action for washing heavily
soiled items. This function cannot be selected if you select
Eco Wash function.
Delay Function
When the program is finished, the display will show “End” and
the machine will turn off after 30 seconds. The door lock will
also release within 2 – 3 minutes.
1.Turn off the water tap.
2.Open the door and remove the washing.
3.Leave the door open slightly to discharge any humidity from
inside.
1.Press the
On/Off
button for 2 seconds to shut down the
program.
2.Select the new program and options.
3.Press
Start / Pause
to start the new program without adding
any extra detergent.
The buzzer and alarm can be turned off by pressing the
Delay
and
Wash
buttons at the same time for 3 seconds.
To protect children the appliance has a child lock function.
This will disable the program selector dial and the option buttons.
• After the program has started press the
Temp.
and
Spin
at the
same time for 3 seconds.
• Follow the above steps to unlock this function.
After the program starts, the door lock icon will flash and the
door will be locked.
• The door is always locked when a program is running. It is
not possible to open the door while the icon is flashing, and
trying to forcibly open the door will cause damage to the
appliance.
• If you wish to open the door due to an emergency, you must
press the
Start / Pause
button. It is important to check the
level of the water inside the drum, and the water temperature,
before trying to open the door.
• If the door will not open after 2 – 3 minutes you can select
the spin program to drain the water from the drum. Switch
off the appliance and open the door.
Safety Notice.
If the program is interrupted during the wash,
thetemperature of the items inside, and the drum, may be very
high. To avoid any scalding, or burns, care must be taken
before removing any items from the drum.
Inlet Water Tap Icon Flashes
If the appliance detects that no water has entered the drum the
tap icon will flash. Make sure the water tap is turned on and
press the
Start / Pause
button. If the icon continues to flash
please refer to the user manual
Failure Handling Guidance
If this should happen during the program
,
the display will show
a failure code. A description of the failure codes can be found
in the
User Manual.
If you need to add other items of clothing after the program has
started you must check the level of the water inside the drum.
If it safe to open the door press the
Start / Pause
button.
•The remaining program time on the display will flash.
The door lock indicator will go out and the door can be opened
after 2 – 3 minutes.
•If the door lock does not stop flashing this indicates that t
he
temperature inside the drum is above 50˚C, or it is too late i
n
the program to add further items of clothing.
Programme instructions
Add detergent, close the door and set the program
Select additional functions
To Start the Program
When a wash program with crease care selected ends, the drum
will rotate intermittently to prevent clothes from creasing, and
the time in the display window will stop at 0:01. Press the
Crease
Care
or
Start/Pause
button if you want to take clothes out.
Crease Care
function will be enabled automatically when
Delay and Night Wash functions are selected. Press
Crease
Care
button again if you want to disable it.
Crease Care
Adding Clothes After the Program Has Started
To Cancel the Program or reselect the options
End of the Program
Mute Function
Child lock
Door Lock Icon
Tap Icon
Main Wash
CO40
Duration (Min)
Programme
(Min)
Energy
Consumption
(kWh)
Water
Consumption –
Main Wash (L)
Total Water
Consumption (L)
1/2
CO60
1/2
CO60
1. The standard
and
cotton programmes,referred to
‘standard 60
℃
cotton programme’ and ‘standard 40
℃
cotton
programme’,and that they are suitable to clean normally soiled
cotton laundry and that they are the most efficient programmes
in terms of combined energy and water consumptions for
washing that type of cotton laundry,in addition,the actual water
temperature may differ from the declared cycle temperature.
2. The power consumption of the stand-by mode is 0.49W,and
when off (no display) is also 0.49W.
3. Please choose suitable detergents suitable for the various
washing temperatures.
4. Remaining moisture content:53%.
5. The energy consumption information of standard programmes
is shown in the table below:
180
218
218
224
255
255
0.76
0.90
0.88
16
16
21
45
45
55
X08080465A
