manualshive.com logo in svg

Hisense WFGE10141VMB, Руководство пользователя

Поделиться
Скачать
Hisense WFGE10141VMB Скачать руководство пользователя страница 15

820726

15

MOVING AND TRANSPORT AFTER INSTALLATION

 If you wish to move the washing machine after it has been installed, the angular pieces and at 

least one blocking rods have to be re-installed to prevent vibration damage to the washing machine 
during transport (see chapter »INSTALLATION AND CONNECTION/Removing the blocking rods«). If 
you lost the angular pieces and the blocking rods, they can be ordered from the manufacturer.

 After transport, the washing machine should be left to stand still for at least two hours 

before it is connected to the power mains, so that it can reach room temperature. The 
appliance should be installed and connected by a trained technician.

 Carefully read the instructions for use before connecting the washing machine. Repair or 

any warranty claim resulting from incorrect connection or use of the washing machine shall 
not be covered by the warranty.

820726en.indd   15

820726en.indd   15

12. 11. 2020   10:44:53

12. 11. 2020   10:44:53

Содержание WFGE10141VMB









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды