Hisense MST6E16JS Скачать руководство пользователя страница 7

Страница: 7 / 66

- 7 -

(8) Do not damage or modify the power cable. It may cause fire or electric shock.

(9) If the power cable is damaged, or if the connector is loose, do not use the

product: otherwise, this can lead to fire or electric shock.

(10) If the power connector or the connector of the power cable becomes dirty or

dusty, wipe it with a dry cloth. Otherwise, this can lead to fire.

(11) Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

1.2 NOTES

Notes on Safe Handling of the LCD panel and during service

The work procedures shown with the Note indication are important for ensuring the

safety of the product and the servicing work. Be sure to follow these instructions.

• Before starting the work, secure a sufficient working space.

• At all times other than when adjusting and checking the product, be sure to turn

OFF the POWER Button and disconnect the power cable from the power source of

the TV during servicing.

• To prevent electric shock and breakage of PC board, start the servicing work at least

30 seconds after the main power has been turned off. Especially when installing and

removing the power board, start servicing at least 2 minutes after the main power has

been turned off.

• While the main power is on, do not touch any parts or circuits other than the ones

Содержание MST6E16JS



































































Результаты поиска

Содержание MST6E16JS

Отзывы:

Бренды по названию

Популярные бренды

Hisense MST6E16JS, Руководство по обслуживанию

Результаты поиска

Содержание MST6E16JS

Отзывы:

Бренды по названию

Популярные бренды