Hisense Laser Cinema PL1H Series, Быстрая настройка

Страница: 23 / 28

15
MANUAL GEOMETRIC CORRECTION
Select points and move it to fit the projected image into the
screen.
NOTE:
Manual Geometric Correction may not be applicable in some
models/countries/regions.
1. Press
/ / < / > buttons on your remote control to move
focus, and press OK button to choose a point you need to
adjust.
2. Long press / / < / > buttons: quick adjustment of the
projected image;
Short press / / < / > buttons: precise adjustment of the
projected image.
3. Press button to save your adjustment, and you can select
other points to adjust the image.
If you want to return the image position to the factory default,
select Reset on the screen.
EYE PROTECTION
In order to protect your eyes, keep the Eye Protection on,
and do not look into the lens. If you get too close to the Laser
Cinema, the light output will be temporarily disabled after 5
seconds.
FOCUS ADJUSTMENT
You can adjust the focus parameters by pressing the up and
down buttons on the remote. The focus effect is adjusted in real
time according to the displayed background image card.