Hisense J1-91, Инструкция по эксплуатации

Страница: 5 / 10

Each time MODE button is pressed, the operation mode
is changed in sequence:
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
16
℃
~30
℃
Heating mode is NOT available for cooling only air conditioner.
HEATING COOLING DRY FAN ONLY
Selecting mode
FAN mode
Auto High Medium
Low
At "FAN ONLY" mode, only "High","Medium" and "Low" are available.
At "DRY" mode, Fan speed is set at "AUTO” automatically, "FAN" button
is ineffective in this case.
Setting temperature
Press once to lower temperature setting by 1
℃
Press once to raise temperature setting by 1
℃
Range of available set temperature
*HEATING, COOLING
DRY -7 ~ 7
unable to set
Turning on
SWING, SMART, TIMER ON, TIMER OFF, CLOCK, SLEEP and SUPER operation modes will be
specified in the following pages.
Press button, when the appliance receives the
signal, the RUN indicator of the indoor unit lights up.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
During heating operation, air flow is not discharged at the beginning. After 2
－
5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
FAN ONLY
Operation instructions
3
Operation modes
Note: Heating mode is NOT available for cooling only models.
Note: At “Dry” mode, the unit can decrease or rise 2
℃ if you still
feel uncomfortable.(For the inverter you can choose from - 7 to 7.)
ON/OFF
MODE FAN
SWING SLEEP SUPER
SMART
IFEEL DIMMER
TIMER ON TIMER OFF CLOCK
ON
OFF
ON
OFF
1 3
4
2