Hisense HUI6220XCUS, Руководство по эксплуатации

Страница: 20 / 24

min.
0.6" (14
mm)
Max. 37.4" (950 mm)
The drain hose can also be connected to a connection nipple
on the sink unit's water trap. The connection nipple must
have an internal diameter of at least 0.6" (14 mm).
The drain hose may be extended by a maximum of 118" (3
m) (the total length of the drain hose must not exceed 177"
(4.5 m)). Any joins and connecting pipes must have an in-
ternal diameter of at least 0.6" (14 mm). However, the drain
hose should ideally be replaced with a new hose without
joins.
No part of the drain hose may be more than 37.4" (950 mm)
above the bottom of the dishwasher.
Attach the drain hose with a hose clamp. Ensure that the
drain hose has no kinks.
Connection to water supply
Use only the inlet hose supplied with the dishwasher. Do
not re-use old or other spare hoses.
The supply pipe must be fitted with a water supply valve.
The water supply valve must be easily accessible, so that
the water can be shut off if the dishwasher has to be moved.
Once the installation is complete, turn on the water supply
valve and allow the pressure to settle for a while. Check
that all connections are watertight.
Water supply
The machine can be connected to either a cold or a hot
(max. 160 °F (70 °C)) water supply. The water pressure
should be 4.2-140 psi.
Connection to cold water supply
Connect the dishwasher to the cold water supply if the
building is heated using oil, electricity, or gas.
Connection to hot water supply
Connect the dishwasher to the hot water supply (max.
160 °F (70 °C)) if the building is heated using an energy-
efficient means such as district heating, solar power, or
geothermal power. Choosing a hot water connection cuts
dishwashing times and reduces the dishwasher's energy
consumption.
NOTE!
Do not exceed the permitted water supply temperature.
Certain materials used in some cookware cannot with-
stand strong heat. See Fragile dishes in the chapter
Loading the dishwasher.
Electrical connection
Information about the electrical connection can be found on
the serial number plate. This specification must match the
electricity supply.
The power outlet for the appliance shall be installed in a
cabinet or on a wall adjacent to the undercounter space in
which the appliance is to be installed. If there is no power
outlet available, contact a qualified electrician for a proper
electrical installation. Do not use an extension cord for this
appliance.
The access hole for the electrical supplie must be round
and smooth and no bigger than 1 1/2'' in diameter. If the
partition is metal, it needs to be covered with an edge pro-
tector.
Use caution when the appliance is installed or removed to
reduce the likelihood of damage to the power cord.
Grounding instructions
This appliance must be grounded. In the event of a malfunc-
tion or breakdown, grounding will reduce the risk of electric
shock by providing a path of least resistance for electric
current. This appliance is equipped with a power cord fitted
with an equipment grounding conductor and a grounding
plug. The plug must be plugged into an appropriate power
outlet that is installed and grounded in accordance with all
local codes and ordinances.
20