Main Source
: Move
OK : Select
1. Analog TV
2. Digital TV
3. VID/SVID1
4. VID/SVID2
5. Component1
6. Component2
7. PC
8. HDMI1
9. HDMI2
10. HDMI3
14
Power ON/OFF
Ø
Turning on: Connect the TV to an AC power outlet and turn on the power switch located below the front right hand
side of unit. The power indicator will initially be red and then will change to blue. A few seconds later an image will
appear on the screen.
Ø
Turning off to standby mode: Press the [ ]button on the front panel or on the remote control to switch standby
mode. You can activate the unit again by pressing the [ ] button.
Ø
Power indicator:
Red indicates standby mode.
Blue shows that the unit is on.
There will be no light when the power switch is in the off position.
Notes:
Turn the power switch off when you do not intend to use the TV for long periods, for example overnight. Remove the
connection from the wall power outlet if you do not intend to use the unit for longer periods, for example if you plan to
be away a few days.
Wait at least 5 seconds after turning off if you want to re-start the TV.
Signal source selection
[SOURCE] button(on the remote ): Press the [SOURCE] button and press the [P+/P-] button to select the signal input,
press [OK] to confirm selection.
[SOURCE] button(on the front right side of panel ): Press the [SOURCE] button and
press [CH / ] button to select signal input, press [SOURCE] to confirm selection.
[HDMI] button: press the [HDMI] button to select the HDMI signal input.
[YP
B
P
R
] button: press the [YP
B
P
R
] button to select the Component signal input.
[D/A] button: press the [D/A] button to switch between the Digital/Analog signal input.
Select channels
You can select channels by pressing the [P+/-] buttons on the remote or press [CH / ] on the
right side of the front panel.
Select channels by numbers
Input channel numbers sequentially to select channels by program numbers.
For example, to select channel 120, press the button 1, and 1will be displayed on the top right corner of the screen,
then press the button 2, 12 will be displayed, press the button 0, channel 120 will now appear on screen.
[VOL ] or [VOL ]
Adjust Volume
Press
on the front panel of the TV or press [v-/v+] on the remote to adjust volume.
Using the [LAST] button
Press the [ LAST ] button repeatedly to alternate between the present program and the previous program.