13
EN
USB Operation
1 Insert the USB device.
2 Press the button on the unit repeatedly or the
button on
the remote control to select
USB
mode.
3 Play starts automatically. If play does not start automatically,
press
BF
/PAIR
button.
- To skip to the previous/next track, press the
H
/
G
buttons
on the remote control.
Bluetooth Operation
Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device to this player, you need to pair your device to this
player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
To connect your device to the unit via Bluetooth, follow the steps below:
1 During ON mode, press the button on the unit repeatedly or the button on the remote control to
select Bluetooth mode. The
Bluetooth
indicator will light flash.
2 Activate your Bluetooth device and select the search mode.
“HS211
” will appear on your Bluetooth
device list.
• If you cannot find the unit, press and hold
the
"
BF
/PAIR"
button on the remote control to be
searchable. The system has entered pairing mode. You will hear
"Pairing"
from the unit and the
Bluetooth
indicator will flash fast.
3 Select
“HS211
” in the pairing list. After the “
Paired
” voice prompt, the system is successfully
connected and the
Bluetooth
indicator will light up solidly.
4 Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from the
soundbar after the “
Disconnected
” voice prompt.
- Press and hold the “
BF
/PAIR
” button on the remote control.
