Hisense HRF209N6CBE, Инструкция по использованию и уходу

Страница: 13 / 24

The control panel will light up when the
door is open, or you touch any button.
The light will go off without touching any
buttons or if the doors have been closed
for over one minute.
When the refrigerator is powered on, all
the icons of the control panel will light up
for 3 seconds, and a buzzer sounds.
The temperature setting reverts back to
the previous setting.
The Super Freeze mode allows you to
freeze items inside with maximum speed.
We recommend that you let the
appliance operate for 6 hours first.
Super Freeze automatically switches off
after 26 hours, and the freezer
temperature setting will revert back to
the previous setting.
When the Super Freeze function is on,
you can touch the “Super Freeze” button
again to switch off. If power cutoff
happens while Super Freeze is activated,
the Super Freeze will not remain active
after power is resupplied.
Before that, please check that the new
filter is the same filter type that came with
your fridge and can be correctly used in
your refrigerator.
After you change the water filter, push and
hold the “Ice On/Off” and “Super Freeze”
buttons for 3 seconds to make the blinking
stop. When you replace the water filter,
some water may leak from the filter and
lines. Please let the water flow into a pan
and wipe up any leakage that may have
occurred.
13
Note:
If you want to exchange the “°F” to “°C”,
please press and hold the “Super Cool”
and “Energy Saving” buttons for 3 seconds.
In general, you should change the water
filter every 6 months to ensure the highest
possible water quality.
After the refrigerator has dispensed about
300 gallons of water, the filter icon “ ”
will blink, reminding you to replace the
water filter.
First of all, you need to purchase a new
water filer. You can purchase the new
filter from the retailer where you
purchased your refrigerator or the
Hisense after-sales service system.
Water Filter
Energy Saving
Energy
Saving
Note:
Demo mode is for store display, and it
prevents the refrigerator from generating
cool air. In Demo Mode, the refrigerator
may seem like it is working but it will not
make cool air.
The indicators on the control panel will
show double “0F”. To cancel this mode,
press and hold “Ice On/Off” and
“Energy Saving” keys at the same time
for 3 seconds until the buzzer beep three
times and the display panel will light for
3 seconds.
Demo mode (Freezer/ Fridge
Temperature Indicator moving)
You can touch this button to turn Energy
Saver mode on and off. When you turn
Energy Saver on, the Energy Saver icon
“ ” lights up. The temperature of the
fridge is automatically switched to 42°F
and the freezer to 2°F. If Energy Saveris
the icon “ ” will go off and the
temperature setting will revert back to
the previous setting.
Door Alarm
When any door is open over 2 minutes, the
door alarm will be actrivated. The buzzer
will sound 3 times every 1minute and the
display will present "dr ".The alarm will stop
when the doors closed or stop automatically
after 10 minutes .
To save energy, please avoid keeping the
door open for long time when using the
appliance.