7
the bottom feet may need to be adjusted.
You can adjust them manually by hand or
by using a suitable tool.
To allow the doors to self-close, tilt the
top
backwards
by
3/8~5/8
inches
(10-15mm).
Installing the handles
Before you use the appliance, you have to
install the handles provided in the fridge
chamber.
The longer one is fridge door handle, the
shorter one is freezer door handle.
Please follow procedures below to install
and reverse the handle.
Place the handle (A) on the door by
fitting the handle footprints over the handle
supports (C), then fasten the screws (B)
with 3mm Allen wrench (provided in
plastic).
When you reverse the fridge door,
please move the handle (A), the screws (B)
and the handle supports (C) to the right
side. Move the screw hole covers (D) to
the left side.
Reversing the fridge door
The side at which the door opens can be
changed, from the right side (as supplied)
to the left side, if the installation site
requires.
Warning!
When reversing the door, the appliance
must not be connected to the
Hisense Refrigerator
A
B