13
Correct Positioning
Good ventilation
Power supply
Power Cord
Protection from Moisture
Sufficient ventilation is required to ensure your refrigerator
operates at optimum high efficiency and with lowest possible
power consumption, therefore you are required to place your
appliance in a position with adequate clearance. We recommend
you place your refrigerator at 100mm away from the wall to the
back of your appliance, 200mm from the side clearance and
300mm from the top of your appliance. A clearance space of 160
degrees is required for the appliance door.
This appliance operates via a single phase power supply and
must be plugged into its own dedicated 220-240 Volts, 50Hz, AC
electric outlet. Ensure that the electric outlet is properly earthed to
ground, if unsure please consult a qualified electrician.
Keep the cord away from the compressor. The surface heat from
this area may cause the cord to melt and provoke electricity leakage.
Do not use an extension cord or adaptor plug. To remove the power
cord always grip the plug firmly and pull straight out of the
receptacle to prevent damaging the cord. Keep the plug and cord
accessible.
Avoid placing the refrigerator in a place where heavy moisture or
high humidity is present, keep the appliance in a dry place away
from frosty or unprotected areas like for example a verandah or
garage. Do not spray directly or submerse the appliance in water.
±
10
%
