The following symptoms are not signs of malfunction but technical limitation. Therefore,
we disclaim
any responsibility for these symptoms.
LCD Panels are manufactured using an extremely
high level of precision technology; however,
sometimes parts of the screen may be missing
picture elements or have luminous spots.
This is not a sign of a malfunction.
Do not install the LCD Panel near electronic
equipment that produces electromagnetic waves.
Some equipment placed too near this unit may
cause interference.
Effect on infrared devices - There may be
interference while using infrared devices such as
infrared cordless headphones.
Declaration of conformity
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1)
This device may not cause harmful
interference, and
(2)
This device must accept any interference
received including interference that may
cause undesired operation.
End of life directives
Your TV also contains material that can be
recycled and reused. For disposal or recycling
information, contact your local authorities or the
Electronic Industries Alliance at
www.eia.org to find a recycler in your area.
Non
-
active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp
video quality. Occasionally, a few non-active
pixels may appear on the screen as a fixed black
(in the case of a dead pixel), blue, green, or red
point. These non-active pixels do not adversely
affect the performance of your TV, and are not
considered defects.
Power source
TO USE AC POWER
1.
The power cord is attached to the TV at
the factory.
2.
Connect the AC cord into an AC outlet.
WARNING
Do not connect this unit to the power using any
device other than the supplied AC cord. This
could cause fire, electrical shock, or damage.
Do not use with a voltage other than the power
voltage specified. This could cause fire, electrical
shock, or damage.
CAUTION
When this unit is not used for a long time, (e.g.,
away on a trip) in the interest of safety, be sure
to unplug it from the AC outlet.
Do not plug/unplug the AC cord when your hands
are wet. This may cause electrical shock.
x