4
The
glasses
will
automatically
turn
off
in
the
following
condition:
to
save
power
1. When the glasses are turned on, the
glasses
will
enter
standby
mode for 1.5 minutes
if
no
3D
sync
signal received. the glasses will turn in to working mode once the glasses
receive the 3D sync signal during standby mode, otherwise, the glasses will automatically
turn off with the green LED indicator blinking three times.
2. If the glasses become disconnected with the emitter
because of incorrect distance and
or angle, they will automatically work for a period of 5 seconds. The glasses will resume
working once a 3D sync signal is received,
otherwise, the glasses will enter into standby
mode(for 1.5 minutes).
3. If you change the channel or input while watching 3D content, the glasses will automatically
work for a period of 5 seconds. the glasses will resume working once 3D sync signal
is received, otherwise, the glasses will enter into standby mode(for 1.5 minutes).
Q1
:
What
can
I
do
if
there
is
no
3D
effect
after
I
have put on
and
turned
on
the
glasses
?
Try this:
1.
Make
sure
you are watching
in
3D sync
signal
covered area .
2. Check the battery volume of your glasses, please charge
if
low in power
3.
Please
check
if
the
TV
setup
is
in
3D
mode
or
not
.
Q2
:
Why
do
the lenses
blink
when
watching
3D
films
?
1
.
Please
charge
the glasses
immediately if the
battery
is
seriously low
.
2
.
I
nterference such
as
magnetic
fluorescent
lamps
(
50
or
60Hz
)
may cause flickers,
please
turn
off
interference
source i
.
f
this
occurs
Tips
Troubleshooting
Try this: