Hisense ERF2A60, Руководство пользователя

Страница: 6 / 6

Remote Control
•
If you do not intend to use the remote control for a long time, remove the batteries. Battery
chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth.
If chemicals touch your skin then wash it immediately.
•
Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries.
•
Do not continue using the remote if it gets warm or hot.
•
Call our Support Center immediately on the support website.
Pairing the Remote Control
• Pair the remote to the TV after you power it on. Keep the remote control within
10
feet from
the TV. Press down the [MENU] button at least 3 seconds to start pairing.
•
If the remote paired successfully then a confirmation will display on the screen. If it did not
pair successfully then an 'unsuccessful' message will display. Repeat step 1.
NOTE
•
If an unknown error occurred with the remote then it could've been caused by interference.
Try to remove what's causing the interference and pair it again.
• If an unknown error occurred in the remote control while the battery power is normal, you
can take out the batteries and press any key for 1~2 seconds, then the remote control can
work normally.
•
The remote cannot be paired to the TV while the TV is in standby mode.