2. Lift the bucket up by the handle.
3. Pour water into a sink or tub.
If a floor drain is not available, or you do not plan
to run your dehumidifier continuously, you may
want to simply empty the bucket.
1. Grasp the bucket sides to slide out bucket.
4. Fold down the handle and reinstall the bucket.
IMPORTANT:
If the Empty Bucket light comes on, the
dehumidifier will not operate. The bucket may
need to be emptied or re-installed.
NOTE:
■ If the water bucket is removed immediately
after turning off the dehumidifier, the water
remaining in the heat exchanger may drip
inside the water bucket storage area.
Remove the water with a soft cloth.
■ While cleaning, do not touch the water level
float.
■ Clean the water bucket once a week during
use.
■ If the ambient temperature is low, there is
less moisture in the air for the product to
remove.
■ Unplug the product before removing the water
bucket. If the bucket is removed while the
product is operating, the compressor will stop.
Option 1 Bucket Draining
10
Handle
Option 2 Gravity Draining
1.
Turn off the dehumidifier and unplug the
power
supply cord.
2. U
ncover the connector cover on the side of
the
unit.
If you plan to run your dehumidifier continuously,
you can choose direct draining by attaching a
garden hose to the unit.
NOTE:
■ The garden hose sold separately.
■
And the drain hose inner diameter should
greater than 1/2”.
■ The connector is designed for North American
garden hoses only.
IMPORTANT:
In North America the garden hose connectors are
3/4” diameter straight (non-tapered) thread with a
pitch of 11.5 threads per inch(male part has an
outer diameter of 1 1/16 inches (26.99mm).
For models without pump:
Connector
cover
3. Remove bucket.
4. Attach a garden hose to the drain hose
connector on the inside of the dehumidifier.
Securely attach the hose to be sure there is no
water leak.
