Hisense 32D20, Руководство пользователя, Страница: 14 / 22

VIEWING THE REMOTE CONTROL 5
TROUBLE SHOOTING 7
Turning the TV On for the First Time
6
Features, appearance and specifications are subject to change without notice.
HDMI IN
Available devices: DVD, Blu-ray player, Audio Video Receiver,
cable box, satellite receiver, game station.
BEST
COMPONENT IN
BETTER
Available devices: DVD, Blu-ray player,
Audio Video Receiver, cable box,
satellite receiver, game station.
AV IN
GOOD
Connect the composite video and audio
output jacks of your legacy A/V equipment,
such as a VCR.
CHANGE THE BATTERIES
1. Push the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the
batteries with the (+) and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
If you would like to program your other household remote controls to your new Hisense
television, please consult the User’s Manual supplied by your Cable or Satellite provider.
The Cable or Satellite providers’ User’s Manuals should include instructions on how to
program their remote to your television.
1 2 3
Press [ ▲ / ▼] to select your Tuner Mode:
Antenna or Cable, press [ENTER] button
to confirm.
1. Press [▲/▼] to select your Picture
Mode: Home Mode or Retail Mode,
press [ENTER] button to confirm.
2. For energy saving, we kindly suggest
you select the Home Mode.
Connect headphone or analog sound system using RCA Y-cable
(1/8"-stereo mini to L/R phono-not provided).
HEADPHONE
Power on/off
Direct channel selection
Mute button
Select input source
Go to the previous channel
Increase volume
Decrease volume
Next channel
Previous channel
Adjust CC mode
Display the information banner
▲/
▲
/ ▲ /
▲
Move Up/Down/Left/Right
or adjust settings
Menu button
Close the menu
Auto ajust button
Zoom button
Sleep timer button
Make the screen stop
Favorite program controlling button
& Media player button
Media player button
Select picture mode
Select sound mode
Channel list
Select TV AV VGA USB source
Open the DTV program guide
(if available)
Audio select button
Mono/Stereo/SAP operation
Dash button
Select a digital sub-channel
INPUT
LAST
SAP
DISPLAY
MTS CCD
CH.
OK
VOL
EXIT MENU
AUTO
TV AV VGA MEDIA
PICTURE
FAVLIST ADD/ERASE FAV+
ASPECT STILL SLEEP
MUTE
1 2 3
4 5 6
7 8 9
-
-
FAV-
-
+ +
0
SOUND CHLIST GUIDE
Program Your Universal Cable or Satellite Remote Control to Operate Your New
Hisense Television!
Gently lift up Insert the batteries
Gently push down
Setup Wizard
Go to next step
Please select your preferred mode
Select Move Exit
Setup Wizard
Go to next step
Select Move Exit
Select the antenna type then auto scan
No sound or picture.
Check if the power cord is in the AC outlet and if it has
electricity.
Check if you have pressed [POWER] button on the
TV or [POWER] button on the remote control.
Check to see if LED light is either red or blue. If
illuminated, power to TV is OK.
I have connected an external
source to my TV and I get no
picture and/or sound.
Check for the correct output connection on the external
source and for the correct input connection on the TV.
Make sure you have made the correct selection for
the input mode for the incoming signal.
[CH
V
/ V] don’t work when I
set the Channel to Cable?
They work with the Air setting?
After switching to Cable, please auto program the channels.
The TV will “remember” all the channels then the TV will
allow you to surf the channels with [CH
V
/V] buttons.
Remote control does not work.
Confirm that TV still has power and is operational.
Change the batteries in the remote control.
Check if the batteries are correctly installed.
Clean the front of the remote control (LED window).
If using a universal remote, be sure to select the TV mode
on the remote.
If the remote still does not work:
• Remove and reinstall the batteries correctly to reset
the remote or install new batteries.
• Press the Power button to turn on the TV. With a universal
remote if you have reset or changed the batteries you
will need to reprogram the remote for the other units.
Check if there is obstruction between the remote control
and the TV.
TIP: If you have a digital camera / camera phone, you can
aim the front of the remote at camera lenses (at this time,
the camera should set on camera mode, not play mode).
Observe the camera screen while pressing a button on the
remote control; you should see flashing light on the screen.
If there is no light observed, the remote control is not
working. You need to repair or replace the remote control.
Picture is normal, but no sound.
Check the volume settings.
Check if Mute mode is set “on”.
Sound but no picture or black
and white picture.
If black and white picture first unplug TV from AC outlet
and replug after 60 seconds.
Check Color Setting if picture is black and white.
Sound and picture distorted or
appear wavy.
An electrical appliance may be affecting TV set.
Turn off any appliances, if interference goes away,
move appliance farther away from TV.
Insert the power plug of the TV set into another power outlet.
Sound and picture is blurry or
cuts out momentarily.
If using an external antenna, check the direction,
position and connection of the antenna.
Adjust the direction of your antenna or reset or fine tune
the channel.
SYMPTOMS POSSIBLE SOLUTIONS
1. Press [◄ / ►] to select the language
to be used for menus and message.
2. Press [▼ / ▲] to select go to next step
and press [OK /►] button to go. 1. Press [▼ / ▲] to select the time zone,
daylight saving time and time format
you want to.
2. Press [◄ / ►] to adjust.
3. Press [▼ / ▲] to select go to next step
and press [OK /►] button to go.
CY-M131006
HDMI
VIDEO
A
V
IN
LR
L
B
P
R
R
COMPONENT
IN
/AUDIO OUT
Speaker
OR