Hisense 120L9G, Быстрая настройка

Страница: 15 / 26

13
FILL THE TOP OF THE IMAGE TO THE SCREEN
If the top of the imge is wider than the screen, then use the
wrench to rotate the left- and right-front feet of the Laser
Cinema clockwise.
If the top of the image is narrower than the screen, then use
the wrench to rotate the left- and right-back feet of the Laser
Cinema clockwise, until the left and right borders of the image
are parallel with the screen borders.
Next, move the projector further from the screen to fill the image
to screen width.
If the back feet are already at their maximum height, rotate the
left- and right-front feet of the Laser Cinema counterclockwise.
Rotate the back feet clockwise Rotate the front feet
counterclockwise
Do not look directly at the lens when this device is on because the laser light may damage your eyes!