Hisense 100L8D, Руководство пользователя, Страница: 32 / 51

31
ENGLISH
The remote control does not
work
• Confirm that TV still has power and is operational.
• Change the batteries in the remote control.
• Check if the batteries are correctly installed.
• Check if the remote is paired.
The picture is blurred or snowflake,
distorted image
• In case of power off, observe whether the Lens is dirty or not. Follow the
product maintenance guide to clean the lens and screen.
The picture does not fit the screen
• Check if the screen or projector is moved and move it back.
• Follow the Quick Start Guide to adjust the laser TV.
• Use Settings-Screen-Geometry to adjust the picture.
TV is prompt over heat warning
message.
• Check if both vent on the left and right side of the TV is clear.
• Check if any heat source is close to the TV.
TV is no picture intermittently
• TV has eye protection feature, it is normal when walk close to the TV during
operation. It will restore the picture automatically when motion is away from TV.
Picture is washed out or lack of color
• The TV screen can reject the ambient light from the top. Check if any light affect
the screen from the bottom. Remove the light source from the lower position.
NOTE
• For usage in Mexico , operation of this equipment is subject to the following two conditions : 1 ) it is possible that
this device doesn’t cause any detrimental interference and 2 ) this device must take any kind of interference,
including that which may cause its malfunctioning.