Rear-Mounted PS2/Serial KVM Extender Instructions (continued)
99028G
•
January 6, 2015
•
www.HopeIndustrial.com
•
International:
+1 (678) 762-9790
• UK:
+44 (0) 20 7193 2618
•
© 2015 Hope Industrial Systems, Inc.
•
Page 2 of 2
8. For monitors without a keyboard, temporarily plug a keyboard into the keyboard PS2 port of the KVM Remote Module. Download the
Adder test pattern generator from the following address:
http://www.HopeIndustrial.com/links/addertest
Perform the image adjustments found in the “Image controls” and “Skew adjustment” sections of the AdderLink X2 Dual Access
manual. After completing the image adjustment, unplug the temporary keyboard and continue to step 10.
9. For monitors with a keyboard, install the keyboard by following the installation instructions that were shipped with the keyboard.
Download the Adder test pattern generator from the following address:
http://www.HopeIndustrial.com/links/addertest
Plug the connectors into the KVM Remote Module. Perform the image controls and skew adjustment found in the "Image controls"
and "Skew adjustment" sections of the AdderLink X2 manual.
10. Install the cover plate using the provided eight sealing screws. Fully tighten all eight screws, then back off one full turn.
