Hirschmann VIP multimedia LAN adapter, Руководство пользователя

Страница: 25 / 67

Video over IP
Manual
26
In order to establish a connection type '
c
', to disconnect '
d
'. Be sure not to
connect two units of the same type, e.g. receiver to receiver. Likewise, a
connection between a
VIP - VRx
receiver and a
VIP -SW1
software
decoder does not make sense.
Command Reference
The following table gives an overview about all available commands:
Cmd Description
?
Displays the help screen
i
Set up a new IP address
->Enter new IP address (old:192.168.0.1): “new IP address”
[Enter]
->IP address set to <new IP address>
s
Set up a new subnetmask
->Enter new subnet mask (old:255.255.255.0): “new subnet
mask” [Enter]
->subnet mask set to <new subnet mask>
g
Set up a new gateway IP address
->Enter new gateway IP address (old:192.168.0.10): “new
gateway IP address” [Enter]
->gateway IP address set to <new gateway IP address>
a
Set up a new alarm IP to connect to
->Enter new alarm IP address (old:192.168.0.3): “alarm IP address” [Enter]
->Alarm IP address set to <new alarm IP address>
c
Connects a live video to the specified alarm IP
->connecting...
VIP
tries to call the alarm IP host
connected
VIP
has established the connection
d
Disconnects any pending video connection
->disconnecting...
VIP
disconnects
disconnected
VIP
has disconnected
m
Display the unit's MAC address
->MAC address: <unit's MAC address>
v
Display version information
->HW version: <version number> SW version: <version number>
t
Activates/deactivates the DHCP protocol for automatic allocation of an
IP address after power up.
Table 1. Terminal Command Reference