5
Fig. 6: Dimensions
3.3 STARTUP PROCEDURE
䡺
You start up the SPIDER 5TX by connec-
ting the supply voltage via the 3-pin termi-
nal block.
13,7
70
63,3
23
8,5
– The shielding ground of the twisted pair
lines which can be connected is electrical-
ly connected to the ground connection.
Fig. 5: Assembling the SPIDER 5TX
3.4 DISMANTLING
䡺
To take the SPIDER 5TX off the ISO/DIN
rail, unlock the snap-in mechanism accor-
ding to Fig 7.
Fig. 7: Dismantling the SPIDER 5TX
4. Further support
In the event of technical queries, please talk
to the Hirschmann contract partner respon-
sible for looking after your account or
directly to the Hirschmann office. You can
find the addresses of our contract partners
– on the Internet
(http://www.hirschmann.de).
Our support line is also at your disposal:
Tel. +49(1805) 14-1538
Fax +49(7127) 14-1551
Answers to Frequently Asked Questions can
be found on the Hirschmann internet site
www.hirschmann.de
The FAQs are located under „Service“ in
the Automation and Network Solutions
section.
www.hicomcenter.com gives you an up-to-
date overview of training courses about
technology and products.
MICE
SPIDER
Fig. 4: Configuration with SPIDER 5TX: Connection of up to 8 data termi-
nal equipments or further segments via TP
5. Technical data
General data
Operating voltage
NEC Class 2 power source 24 VDC (-25% +33%) safety extra-low voltage (SELV/PELV)
5 A maximum
Buffer time
min. 10 ms at 24 VDC
Potential difference between input
Potential difference to input voltage, +24 VDC: 32 VDC
voltage and housing
Potential difference to input voltage, ground: -32 VDC
Current consumption at 24 VDC
2.9 W maximum
Overload current protection at input
non-changeable fuse
Dimensions W x H x D
25 mm x 100 mm x 78.5 mm
1 in x 4 in x 3.1 in
Weight
110 g
0.24 lb
Ambient temperature
0 ºC to + 60 ºC
32 ºF to 140 ºF
Storage temperature
- 40 ºC to + 70 ºC
-32 ºF to 158 ºF
Humidity
up to 95% (non condensing)
Atmospheric pressure
min. 79 kPa
Pollution Degree
2
Protection type
IP 30
