Hirschmann PRS 80 Wind Speed, Руководство оператора и сервисное руководство

Страница: 11 / 23

System Operation
© Hirschmann ECS, 2006; PRS 80 Wind Speed Rev.C 05/23/06 190184_C
5
Here is the wind speed sensor icon displayed in the system. Wind Speed Sensor
5.1 MENU'S
™ LIMITS
™ SETUP
♦
SENSORS
ƒ WIND SPD
™ INSTALL NEW
™ UNINSTALL
™ ENABLE / DISABLE
♦
SCREEN/BEEPER
ƒ UNITS
•
LBS - MPH
•
KG - KPH
ƒ
LANGUAGE
ƒ PCT BAR IS ON/OFF
ƒ WARNING ARE ON/OFF
♦
DIAGNOSTICS
ƒ
SCREEN
ƒ KEYPAD
ƒ OUTPUTS
ƒ ALARM LOG
ƒ
COMM DATA
ƒ LOW BATTERIES (This will only be shown if a low battery condition exists)
™ ABOUT
5.2 Menu Selection Instructions
From the operating screen, press to enter the menu selection.
Use the up and down to scroll through and high light your selection then press to
make the selection.
5.3 Limits
The system sets the default speed limit to 30 mph. This is represented in by the bar graph. The bar
graph shows the % of the limit that is set. The limit can be set to other values.
To change the default limit, press , and then select the sensor for the limit that you want to set.
Use the arrows to change the value. Use the to confirm the values.
Note: a prewarning can be set so as to beep the alarm when a limit is approached but not reached.
This is set with the warning option. Menu- SETUP/ SCREEN/BEEPER/ WARNING.