Hirschmann BAT54-F, Руководство пользователя

Страница: 30 / 42

30
BAT54-F
Release 12/07
„
Meaning of the LEDs
The behavior of the LEDs is described using the following terms:
X Blinking means that the LED switches on and off at regular intervals
in the color specified.
X
Flashing means that the LED lights up very briefly in the color speci-
fied, then is switched off for a much longer time (about 10x as long).
X
Flashing inversely means the reverse. Here the LED is on for a long
period in the color specified and is only briefly interrupted.
X Flickering means that the LED switches on and off at irregular inter-
vals.
„
Device status
These LEDs provide information about conditions which affect the opera-
tion of the whole device.
P (green/
red LED) Power
Green on continuously Device is ready for operation.
Red blinking (slowly) Charge lock active (see "Dual-Band Industrial Access Point /
Access Client / Access Bridge BAT54-Rail" user manual)
Green/red blinking (quickly) Unsafe configuration (no password set)
Red blinking (quickly) Hardware error
WLAN 1
WLAN 2
(green
LEDs)
WLAN connection and WLAN data traffic
of internal WLAN modules
Off No WLAN network defined or WLAN module deactivated. No
beacons sent from the WLAN module.
Green At least one WLAN network defined and WLAN module acti-
vated. Beacons sent from the WLAN module.
Green flashing inversely Number of flashes = number of connected WLAN stations and
P2P radio lines, then there is a break.
Green blinking DFS scanning or another scan procedure.
Green flickering TX data traffic.
P - Power
WLAN1
LS/DA -
Ethernet-Port
WLAN2
LS/DA P
WLAN
2
WLAN
1