11
6. Technical Data
General data
MACH 3001 Chassis
MACH 3001
Chassis with built-in basic board M-BASIC4, power supply unit and 4 fans;
for up to 4 media modules, up to 2 external 24VDC power supply units
Integrated power supply unit:
Operating voltage
230/120VAC (85VAC to 264VAC)
Input frequency
50/60 Hz (47Hz to 63Hz)
Current input
0.9 A(230VAC); 1.8A (120VAC)
Power failure bridging
> 20 ms
Cosine phi at maximum load
0.98
Activation current
Max. 40 A
Fuse
Built into the power supply unit
Fuse of the 16 A power supply network, B characteristic
24VDC inputs at back:
Operating voltage
24VDC (-20% +33%) Safety Extra Low Voltage (SELV)
(redundant inputs uncoupled, with reverse polarity protection)
0 Volt connection of the 24VDC input plug(back) is connected to chassis!
Buffer time
Min. 10 ms at 24VDC
Current consumption with media modules
Max. 6.9 A at 24VDC
Overload current protection at input
Non-changeable thermal fuse
Recommendation
Protect every power supply unit in a device via its own power circuit
Required power
MACH 3001
40 W
M-FAST 8MM-MT 1
6 W
M-PSU1
60 W
M-GIGA 1LH-SC
8.5 W
M-BASIC 4
50 W
M-GIGA 1LX-SC
8.5 W
M-ETH 4MM-ST
8 W
M-GIGA 2LH-SC
10 W
M-FAST 8TP-RJ
10 W
M-GIGA 2LX-SC
10 W
M-FAST 2LH-SC
7.5 W
M-GIGA 2SX-SC
10 W
M-FAST 2MM-SC
7.5 W
M-GIGA 2TP-RJ
10 W
M-FAST 2SM-SC
7.5 W
M-Router
5 W
Dimensions W x H x D
482.6 mm (= 19 ") x 88.1 mm (= 2 HE) x 515 mm
Mass (state of delivery)
8.5 kg appox.
Ambient temperature
Surrounding air 0 ºC to + 50 ºC
+ 32 °F to + 122 °F
Storage temperature
Surrounding air - 20 ºC to + 80 ºC
- 4 °F to + 176 °F
Humidity
20% to 90% (non condensing)
Atmospheric pressure
up to 2000 m (795 hPa, higher altitudes on demand)
Laser protection
Class 1 conforming to EN 60825
Protection type
IP 30
Interference characteristics
EN 55022 Class A, CFR-47 Part 15, FCC, Class A
Specifications and standards
EMV
– Emission
– EN55022:Class A – Information technology equipment – Radio disturbance characteristics
– EN61000-3-2
– EN61000-3-3
– CFR-47 Part 15 – Code of Federal Regulations, FCC, Class A
– Immunity
– EN 61000-6-2 Generic standards – Immunity for industrial environments
– (EN61131-2 – Programmable Controllers) IEC 65B/421/CDV
– EN55024 – Immunity Limits for Power Ports
Security
– General
– EN60950 – Safety of Information Technology Equipment (ITE)
– cUL505 – Safety of Industrial Control Equipment
– Laser protection
– EN60825-1
Certifications
cUL 508 /CSA C22.2 No.142
Interfaces of the media modules
M-ETH 4MM-ST
4 ports based on 10BASE-FL with BFOC sockets
transmission distance 2 km / 6,500 ft with multimode fiber
M-FAST 8TP-RJ
8 ports based on 10BASE-T/100BASE-TX with RJ45 sockets (10/100 MBit/s)
transmission distance 100 m / 330 ft twisted pair
M-FAST 2LH-SC
2 ports based on 100BASE-FX with DSC sockets
transmission distance 80 km / 262,400 ft maximum (9 µm SMF, 1550 nm)
M-FAST 2 SM-SC
2 ports based on 100BASE-FX singlemode with DSC sockets,
transmission distance 20 km / 65,000 ft with singlemode fiber
M-FAST 2 MM-SC
2 ports based on 100BASE-FX with DSC sockets,
transmission distance 2 km / 6,500 ft with multimode fiber
M-FAST 8 MM-MT
8 ports based on 100BASE-FX with MTRJ sockets,
transmission distance 2 km / 6,500 ft with multimode fiber
M-GIGA 1LH-SC
1 port based on 1000BASE-LX with DSC socket
transmission distance 70 km / 229,600 ft maximum (9 µm SMF, 1550 nm)
M-GIGA 1LX-SC
1 port based on 1000BASE-LX with DSC socket
transmission distance 550 m / 1,800 ft (62,5 µm MMF*, 50 µm MMF*),10 km (9 µm SMF)
M-GIGA 2LH-SC
2 port based on 1000BASE-LX with DSC socket
transmission distance 70 km / 229,600 ft maximum (9 µm SMF, 1550 nm)
