HIRED-HAND Mega-Flow Butterfly Скачать руководство пользователя страница 3

Part No. 4801-5327 Rev 6/07 

Mega-Flow Butterfly Cone - Unassembled  

Page 3 of 12 

2. Limited 

Warranty

All products are warranted to be free from defects in material and workmanship for a 

period of one (1) year from the date of purchase if installed and used in strict accordance 

with the installation instructions.  Liability is limited to the sale price of any products 

proved to be defective or, at manufacturer’s option, to the replacement of such products 

upon their return. No products are to be returned to the manufacturer, until there is an 

inspection and/or a return-goods authorization (RGA) number is issued.  

All complaints should be directed first to the authorized distributor who sold the product. If 

satisfaction is not obtained or the name of the distributor is not known, write the 

manufacturer that appears below, directed to the attention of Customer Service Manager. 

This limited warranty is expressly in lieu of any and all representations and warranties 

expressed or implied, including any implied warranty of merchantability or fitness for a 

particular purpose.  The remedy set forth in this limited warranty shall be the exclusive 

remedy available to any person. No person has authority to bind the manufacturer to any 

representation or warranty other than this limited warranty.  The manufacturer shall not 

be liable for any consequential damages resulting from the use of our products or caused 

by any defect, failure or malfunction of our products. (Some areas do not allow the 

exclusion or limitation of incidental or consequential damages, so the above limitation or 

exclusion may not apply to you). 

This warranty gives you specific legal rights and you may also have other rights that vary 

from area to area. 

Warrantor: 

Hired-Hand Mfg., Inc. 
PO Box 140 
1751 County Road 68 
Bremen, Alabama  35033 
Phone 256-287-7000

Содержание Mega-Flow Butterfly













Отзывы: