HIOTH
User Manual
HIOTH TECHNOLOGY CO.,LTD.
The smoke sensor signal can be sent to alarm system or fire alarm system hub, through a NC
Battery or VDC powered
Built-in temperature sensor
Automatic efficiency test performed every 5 seconds.
Specifications
Radio protocol: Z-Wave
Radio Frequency: 868.4MHz EU; 908.4MHz US; 921.4Hz ANZ; 869.2Hz RU
Power supply: DC 12-24V
Battery type
：
CR123A
Power consumption
（
VDC operation
）
: 0.4W
Output terminals maximum current carrying capacity
：
25mA
Maximum voltage at output terminal: 24V(AC/DC)
Operational Temperature: 0
℃
-40
℃
Measured Temperature: -20
℃
-100
℃
Range
：
up to 50m outdoors, up to 30m indoors (depending on the building materials used)
Dimension
：
65mm x 28mm
Installation Instructions
It’s recommended to install the sensor on the ceiling or upper portion of wall at least 40cm from
corners and other objects. Particular attention should be paid toany adjacent objects or devices
which can impede smoke’s access to it’s sensor.It’s recommended to install the sensor in all rooms
prone to fire, and between such rooms as well.
