HIOTH TECHNOLOGY CO., LTD.
USER MANUAL
www.HiotH.com
INSTALL THE SWITCH BASE
As shown in Fig.3, install the touch switch inside the wall box after wiring, then screw up to make
it fixed on the wall. Put the base to the wall as well as cover and press the touch panel.
Fig.3
Using Instruction
NETWORK ENTRY
1
）
Connect the power supply.
2
）
Turn on any button of the switch
3
）
Long press this button for 5 second until the blue light flashing
4
）
Choose "COOLT" and the corresponding gateway on APP, then click "Save"
5
）
When prompt a message “Request Access Success”, go to the device list interface to refresh
the device list. The device will be displayed.
-
NOTE
Touch Panel Switch comes with infrared detection function which will send the information when
someone leaves after 8 seconds. For the new connected to the system, it will take 1 minute for the
infrared function to work.
