HIOS BLF-2000, Руководство по эксплуатации

Страница: 13 / 22

- 13 -
■ Suction (Vacuum) Attachment BLFQ series
As for vacuum pick up screwdriver, we deal with BLFQ (standard) and BLFR (custom-made)
Exterior view of BLFQ
BLFQ accessories list
Model
Mouthpiece Bit
Suction Attachment
ASSY
Accessories
Model
number Length
Length
(L)
Diameter Model number
BLFQ-2000 F3 18mm 60mm HIOS H4( ∅ 4) BLFQ2-SET With Hose (Hose size:
Inner diameter ∅4 ×
Outer diameter ∅7;
Length: 3.5m)
BLFQ-5000 F6 31mm 100mm HIOS H5( ∅ 5) BLFQ5-SET
BLFQ-7000 F6 31mm 100mm HIOS H5( ∅ 5) BLFQ7-SET
* When you use BLFQ series, please attach the mouthpiece / bit / Suction Attachments in the table (optional
parts).
・
Please contact us about the bit type of 1/4 HEX (hex bit with distance across the flats is 6.35 mm) for BLFQ-
7000.
Mouthpiece
The model numbers of the mouthpieces holding the screws are as follows:
F3 (supports BLFQ-2000) F6 (supports BLFQ-5000 and BLFQ-7000)
Adjustment of mouthpiece (Only the mouthpieces of BLFQ
series are adjustable.)
The length of the screw protrudes from the mouthpiece can
be adjusted.
1. Rotate both the A part and B part at the same time to loosen.
2. Rotate the A part to open the holder; you can then adjust the length of the screw protrudes
from the mouthpiece.
3. Once adjustment is completed, tighten the B part to lock while holding the A part.
Bits
The bits used in the Suction (Vacuum) Attachment are required to be longer (L length) than
standard.
L length
Mouthpiece
Suction (Vacuum) Attachment ASSY
A part
The bottom part of
the screw
B part
｝