Hioki SW9001 Скачать руководство пользователя страница 16

Страница: 16 / 170

Measurement Flowchart

1.6 Measurement Flowchart

Thoroughly read “Usage Notes” (p. 4) beforehand.

Installation, connection, and turning on of power

Installing the device. (p. 4)

Attaching the module to the device. (p. 15)

Connecting the measurement cable to the module. (p. 18)

Connecting the device and the instrument using the connection cable. (p. 19)

Connecting the communications cable and making settings.

•

Set the communication setting mode (p. 22).

•

Connect the LAN, USB, or RS-232C cable to the PC (p. 59).

Connecting the device and the external control device. (for scan measurement)

•

Connect the device to an external device such as a PLC using EXT. I/O (p. 49).

Connecting the power cord. (p. 23)

Turning on the power. (p. 23)

Inspection before measurement (p. 25)

Setting before measurement

Selecting the module connection method. (p. 28)

Switching the shield. (p. 29)

Selecting the channel to be measured. (p. 30)

Starting the measurement

Sending a measurement command to the instrument.

Receiving measurement results.

•For information on the measurement processing and receiving measurement results, see the

instruction manual of the instruments to be used.

Ending the measurement

Turning off the power. (p. 23)

HIOKI SW1001A961-04

Содержание SW9001











































































































































































Результаты поиска

Содержание SW9001

Отзывы:

Бренды по названию

Популярные бренды

Hioki SW9001, Инструкция по эксплуатации

Результаты поиска

Содержание SW9001

Отзывы:

Бренды по названию

Популярные бренды