Hioki SS7081-50, Инструкция по эксплуатации

Страница: 20 / 71

17
2.6 Turning the Instrument On and Off
CAUTION
Do not operate the instrument on any of the power sources (UPS or uninterruptible power supply,
DC/AC inverter) that provide rectangular-wave or pseudo-sine-wave power. Doing so may
damage the instrument.
Turning on the instrument
1
Set the main power supply switch on the back to ON ( | ).
→ The instrument OUTPUT display will blink white. Do not send any communications commands before the
blinking starts.
→ If the warming up time (30 minutes) is exceeded, the blinking instrument OUTPUT display will change to lit.
IMPORTANT
When the instrument is turned on, the power supply frequency for the instrument will be set to the power
supply frequency automatically.
Turning off the instrument
1
Set the main power supply switch on the back to OFF (

).
If power interruptes (a breaker tripped, etc.) while the instrument is on, the instrument will automatically start once
the power supply is restored next time.
Settings are not backed up. When the instrument is turned on, all settings are at their default values. For the default
values, see “Initialize the instrumen” (p. 40).
HIOKI SS7081C961-00