Hioki SM7860 Series, Инструкция по эксплуатации

Страница: 24 / 64

20
Operating Conditions Setting
2.6 Operating Conditions Setting
This section describes how to set the operating conditions according to the manner in which the device is
to be used. Settings are configured via either of the device’s external interfaces:
Refer to “3 Changing the Interface” (p. 23)
The device cannot be configured directly in a standalone manner.
Setting function Description of operation and settings Reference
Output voltage
Sets the output voltage.
Setup ranges: 1.0 V to 1000.0 V (0.1 V resolution)
p. 34
Voltage error alarm
Generates an alarm when the monitor voltage error relative to the output
voltage setting falls outside the set value range.
Setup ranges: ±2 to ±19% (1% resolution)
p. 34
LCD display mode
Turns the LCD display on and off.
OFF/ ON
p. 35