7
Screen display
Display
5.7-inch VGA-TFT color LCD (640 × 480dot)
Waveform display
scale
Time axis: × 10 to × 2 (zoom view supported for high-speed
recording only), × 1, × 1/2 to × 1/2,000
Voltage axis: × 20 to × 2, × 1, × 1/2 to × 1/10
Comment input
Titles and comments input for individual channels
Logic waveform dis-
play
Select 2 recording widths; display positions can be set separately
Display items
Waveform display; simultaneous display of waveform and gage;
simultaneous display of waveform, gage, and settings; simultaneous
display of waveform and calculation results; simultaneous display of
waveform and cursor values (A/B cursor values)
The following display items are supported when using real-time
functionality:
Monitor function
Value
(instantaneous value or RMS value)
and measured waveform
(monitor screen display with refresh rate of 0.5 sec)
Display digits: 5
Instantaneous value
display
Time: Display of time elapsed since start of measurement or trigger point
Date: Display of date and time at which data was captured
Number of data points: Display of number of data points captured since
start of measurement
Other display
functions
• Cursor measurement
(two cursors [A/B], support for all channels)
• Upper and lower limits can be set
(to align waveform amplitude with
upper and lower limits).
• The zero position of the analog waveform can be moved in 1% steps.
• The waveform display can be set to any of 24 colors.
• Zero adjustment can be performed for all channels and ranges at once.
n
Specifications of Options
(sold separately)
n
Appearance and Dimensions
with PRINTER UNIT MR9000 attached
303 mm
(11.93 in)
19
9 m
m
(7
.8
3 in
)
205 mm
(8.07 in)
19
9 m
m
(7
.8
3 in
)
67 m
m
(2
.6
4 i
n)
Analog input
(Isolated BNC terminal)
CF card slot
Logic probe
terminal
USB terminal
(for PC communication)
USB terminal
(for USB memory)
External
control
terminal
n
PC Software Specifications
Bundled with the MR8880 in the CD-R
Wave Viewer (Wv) Software
Functions
• Simple display of waveform file
• Text conversion: convert binary data file to text format, with
selectable space or tab separators in addition to CSV, and specifiable
section, thinning available
• Display format settings: scroll functions, enlarge/reduce display,
display channel settings
• Others: voltage value trace function, jump to cursor/trigger position
function
Operating environment
Windows 8/7 (32/64-bit), Vista (32-bit), XP, 2000
Cable length and mass:
Main unit cable 1.5 m (4.92 ft), input section cable 30 cm
(0.98 ft), approx. 150 g (5.3 oz)
Note: The unit-side plug of the
9320-01
is different from the
9320
.
LOGIC PROBE 9320
-01
Function
Detection of voltage signal or relay contact signal for High/Low state recording
Input
4 channels
(common ground between unit and channels)
, digital/contact input,
switchable
(contact input can detect open-collector signals)
Input resistance: 1 MΩ
(with digital input, 0 to +5 V)
500 kΩ or more
(with digital input, +5 to +50V)
Pull-up resistance: 2 kΩ
(contact input: internally pulled up to +5 V)
Digital input threshold
1.4V/ 2.5V/ 4.0V
Contact input
detection resistance
1.4 V: 1.5 kΩ or higher
(open)
and 500 Ω or lower
(short)
2.5 V: 3.5 kΩ or higher
(open)
and 1.5 kΩ or lower
(short)
4.0 V: 25 kΩ or higher
(open)
and 8 kΩ or lower
(short)
Response speed
500ns or lower
Max. allowable input
0 to +50V DC
(the maximum voltage that can be applied across input pins without
damage)
LOGIC PROBE MR9321
-01
Function
Detection of AC or DC relay drive signal for High/Low state recording
Can also be used for power line interruption detection
Input
4 channels
(isolated between unit and channels)
, HIGH/LOW range switching
Input resistance: 100 kΩ or higher
(HIGH range)
, 30 kΩ or higher
(LOW range)
Output (H) detection
170 to 250 V AC, ±DC 70 to 250 V
(HIGH range)
60 to 150 V AC, ±DC 20 to 150 V
(LOW range)
Output (L) detection
0 to 30 V AC, ±DC 0 to 43 V
(HIGH range)
0 to 10 V AC, ±DC 0 to 15 V
(LOW range)
Response time
Rising edge 1 ms max., falling edge 3 ms max.
(with HIGH range at 200 V
DC, LOW range at 100 V DC)
Max. allowable input
250 Vrms
(HIGH range)
, 150 Vrms
(LOW range) (the maximum voltage that can
be applied across input pins without damage)
Cable length and mass:
Main unit cable 1.5 m (4.92 ft), input section cable 1 m
(3.28 ft), approx. 320 g (11.3 oz)
Note: The unit-side plug of the
MR9321-01
is different from the
MR9321
.
Cable length and mass:
70 cm (2.30 ft), Output side: 1.5 m (4.92 ft), 170g (6.0 oz)
DIFFERENTIAL PROBE P9000
(Accuracy guaranteed for 1 year, Post-adjustment accuracy
guaranteed for 1 year)
Measurement modes
P9000-01: For waveform monitor output, Frequency properties: DC to 100 kHz
-3 dB
P9000-02: Switches between waveform monitor output/AC effective value output
Wave mode frequency properties: DC to 100 kHz -3 dB, RMS mode frequency
properties: 30 Hz to 10 kHz, Response time: Rise 300 ms, Fall 600 ms
Division ratio
Switches between 1000:1, 100:1
DC output accuracy
±0.5 % f.s.
(f.s. = 1.0 V, division ratio 1000:1), (f.s. = 3.5 V, division ratio 100:1)
Effective value mea-
surement accuracy
±1 % f.s.
(30 Hz to less than 1 kHz, sine wave)
, ±3 % f.s.
(1 kHz to 10 kHz,
sine wave)
Input resistance/capacity
H-L: 10.5 MΩ, 5 pF or less (at 100 kHz)
Maximum input voltage
1000 V AC, DC
Maximum rated volt-
age to ground
1000 V AC, DC (CAT III)
Operating
temperature range
-40°C to 80°C (-40°F to 176°F)
Power supply
(1) AC adapter Z1008
(100 to 240 V AC, 50/60 Hz)
, 6 VA
(including AC
adapter)
, 0.9 VA
(main unit only)
(2) USB bus power
(5 V DC, USB-microB terminal)
, 0.8 VA
(3) External power source 2.7 V to 15 V DC, 1 VA
Accessories
Instruction manual ×1, Alligator clip ×2, Carrying case ×1
WAVE PROCESSOR 9335
Distribution media
One CD-R
Operating
environment
Computer running under Windows 8/7 (32/64-bit), Vista (32-bit), XP, 2000
Display functions
Waveform display, X-Y display, Digital value display, Cursor function,
Scroll function, Maximum number of channels
(32 channels analog, 32
channels logic)
, Gauge display
(time, voltage axes)
, Graphical display
File loading
Readable data formats
(.MEM, .REC, .RMS, .POW)
,
Maximum loadable file size: Maximum file size that can be saved by a
given device
(file size may be limited depending on the computer configuration)
Data conversion
Conversion to
CSV format, Tab delimited, Space delimited, Data culling
(simple), Convert for specified channel, Batch conversion of multiple
files
Print functions
Printing image file output
(expanded META type, “.EMF”)
,
Supported printer: usable on any printer supported by operating system
Print formatting:
(1 up, 2-to-16 up, 2-to-16 rows, X-Y 1-to-4 up, preview, hard copy)
Other
Parameter calculation, Search, Clipboard copy, Launching of other appli-
cations
