Hioki MR8827 Скачать руководство пользователя страница 312

Страница: 312 / 436

307

Display

Contrast

Selects one of three backlight brightness levels.

Light / Normal / Dark

Display Color

Screen background and character colors on the Waveform screen can be set as

desired. Select

[Color Edit]

then change the

[R]

(red),

[G]

(green) and

[B]

(blue)

values of each item to change its color. (p. 308)

Color 1 / Color 2 / Color 3 / Color Edit

Beep Sound

This function audibly indicates warnings and operating conditions with beeps.

Off

Beep are disabled.

Warning

Beeps for error messages (warning displays) and NG (fail) judgments.

(Default setting)

Warn+Act

In addition to the warning beeps above, beeps to indicate start, trigger,

stop and auto-save-finish.

Language

Selects the display language.

English

(Default setting)/ Japanese / Korean / Chinese

Auto Scale

Variable values are automatically changed according to changes in scaling and

voltage range.

Refer to “8.6 Set the Waveform Position (Variable Function)” (p. 158).

Off/On

(Default setting)

Start Action

To prevent operation mistakes from unintentionally starting measurement, the

START

key operation method can be changed. This setting does not affect

external control terminal functions.

One Push

Measurement starts with on press.

(Default setting)

Two Push

Measurement starts with two presses.

Hold 2s*

Measurement starts when pressed and held for two seconds.

* When the

START

key is pressed, “Hold START key down.” will be displayed.

After pressing for two seconds, the message disappears and measurement starts.

Stop Action

Normally, pressing the

STOP

key once causes measurement to stop after the

specified recording length is completed, and pressing it twice stops measurement

immediately. This setting is provided to allow a single press to stop measurement.

Two Push

Press the key twice to stop measurement.

(Default setting)

One Push

Press the key once to stop measurement.

Mouse Speed

Sets the mouse movement speed.

Use the mouse to move the slider handle while holding down the left mouse

button.

Sliding it towards “Min” makes the mouse pointer move more slowly slowly, while

sliding it towards “Max” makes the pointer move more quickly.

System Environment Settings

Содержание MR8827




















































































































































































































































































































































































































































Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды

Hioki MR8827, Инструкция по эксплуатации

Результаты поиска

Содержание MR8827

Отзывы:

Похожие инструкции для MR8827

Бренды по названию

Популярные бренды