Hioki Memory HiCorder MR6000 Скачать руководство пользователя страница 103

Страница: 103 / 392

Saving/Loading Data and

Managing Files

This chapter explains

how to save and load data and manage files.

Before saving data, select

[Status] > [Save]

, and configure the save setting.

The file screen allows you to load data.

Explorer allows you to manage files.

You can use Explorer to control filing, including copying and moving files, and to check files not

supported by the instrument.

See “4.4 Managing Files” (p. 116).

> [Status] > [Save]

Operation available on the

[Save]

screen

Automatic saving

Configuring the automatic saving method settings for measured data (p. 102)

Real-time saving

Setting the method of saving waveform data in real time (p. 106)

SAVE

key operation

•Setting the operation implemented when the

SAVE

key is pressed (p. 109)

•

Specifying contents to be saved when

[Quick]

is selected (p. 109)

Saving/Loading Data and Managing Files

HIOKI MR6000A966-03

Содержание Memory HiCorder MR6000









































































































































































































































































































































































































Результаты поиска

Содержание Memory HiCorder MR6000

Отзывы:

Hioki Memory HiCorder MR6000, Инструкция по эксплуатации, Страница: 103 / 392

Результаты поиска

Содержание Memory HiCorder MR6000

Отзывы: