Hioki LR8450, Инструкция по эксплуатации

Страница: 49 / 310

45
Using the Scaling Function
Unit Measure Channel Trigger Alarm Calculation System
Scaling settings during integration measurement
You can use the scaling function to convert the integrated pulse count to the measurement target’s
physical properties (watt hours, volt-amperes, etc.) and then display or record the result.
The pulse output device will have predetermined physical quantity that corresponds to 1 pulse or
a number of pulses that corresponds to a value of one in the basic units (for example, 1 kWh, 1 L,
1 m
3
).
> >
2 2
3 3
1 1
1
Select the scaling display method.
OFF  Does not use the scaling function.
Decimal Displays converted values as decimals.
Exponent Displays converted values as exponents.
2
Enter the post-conversion unit (up to 7 single-byte characters).
See “Text entry method” (p. 8).
1
Settings and Operation