Hioki LR8410-20, Инструкция по эксплуатации

Страница: 52 / 364

1.4 Basic Operation
40
You can confirm the status of inputs and display ranges with the current settings (data is
not acquired to internal buffer memory).
This function is convenient for checking measured values before activating real-time sav-
ing(Auto saving).
Confirming Inputs (Monitor)
• The monitor function is not available while measuring.
• To display instantaneous values while the instrument is measuring, first
press WAVE/DATA to switch to the [Wave+Value] display, then start
measurement.
• Depending on the scaling setting, channels requiring more than 14 char-
acters to display the measured value and unit symbols may be displayed
in smaller characters.
Press
MONITOR
.
You can switch the monitor display format
by pressing the monitor key again.
Wave
Select to display the waveforms for all channels,
or for those on a selected input unit or channel.
Unit
Select the input unit for the value dis-
play.
Move the cursor to
[UNIT1] , press
ENTER , and switch with the up/down
cursor or UNIT .
Each channel’s display is switched
with the
CHAN keys.