Hioki LR5092, Инструкция по эксплуатации

Страница: 61 / 148

6.1 Displaying and Changing Collector System Settings
55
3
6
Chapt
e
r 6 Collect
or Sy
stem Sett
ings
This section describes how to display and change the system settings of the col-
lector, and perform self checks.
You can display and change the save destination setting of one-touch collection for a
new logger.
* When data is collected from a logger for which data has been collected previously (logger
with same serial number), the data is saved to the location (collector memory or SD memory
card) where the previous collected data was saved regardless of the save destination set-
ting of one-touch collection.
The initial setting for the collection destination is [Collector Memory] .
Collector System

Settings
Chapter 6
6.1 Displaying and Changing Collector System
Settings
One-touch Collection
What is One-touch Collection?
A function that allows you to collect data in the collection destination set
for recorded data of a logger by simply pressing the
COLLECT button.
(p.31)