Hioki IM7580A-1, Инструкция по эксплуатации системы связи

Страница: 8 / 23

5
2
Connection and Setting
2.1 Overview of Communication
You can control the instrument with communication commands from a computer via the USB
,
GP-IB
,
RS-
232C and LAN interfaces.
There are the following four communication methods. To enable communication , the communication
conditions need to be set on the instrument.
USB communication (p. 7)
The instrument is communication class compatible.
LAN communication (p. 9)
Command control using the TCP/IP protocol is possible.
GP-IB communication (when the Z3000 is connected) (p. 14)
• Commands common to IEEE-488-2 1987 (requirement) can be used.
• The instrument has been designed with reference to the following standard.
(Reference standard: IEEE-488.2 1987)
RS-232C communication (when the Z3001 is connected) (p. 16)
WARNING
• Always turn both devices OFF when connecting and disconnecting an interface
connector. Otherwise
,
an electric shock accident may occur.
• To avoid damage to the instrument , do not short-circuit the terminal and do not
input voltage to the terminal.
• Failure to fasten the connectors properly may result is sub-specification
performance or damage to the equipment.
2 Connection and Setting
2