Hioki IM7580, Инструкция по эксплуатации

Страница: 116 / 340

108
Performing Measured Value Search
4.7.2 Setting the Search Type
1 2
1
Press [SEARCH] of the target cursor.
2
Set the search type.
[MAX]
Searches the maximum value of
measurement result.
[MIN]
Moves the cursor to the minimum value of
the measurement results.
[TARGET]
Searches the measured value set in the
target measured value.
[L-MAX]
Searches the local maximum value of the
measurement result.
Filter setting is available. (p. 109)
[L-MIN]
Searches the local minimum value of the
measurement result.
Filter setting is available. (p. 109)
Setting the measured value to be searched
• The value is set when [TARGET] is selected in “Setting the Search Type” (p. 108).
• Set the target value to search when executing a target search.
2
1
1
Use the numeric keypad to set the measured value
to be searched.
2
Press [SET] to confirm the setting.
Settable range -9.99999 G to 9.99999 G
[-]
Inputs the unit with a minus (-) sign.
[×10
3
] Increases the prefix of the unit.
[/10
3
] Decreases the prefix of the unit.
[C] Repeats the input.
[CANCEL]
Cancels the setting.