Hioki FT6031-50, Инструкция по эксплуатации

Страница: 33 / 98

27
Inserting/Replacing Batteries
CAUTION
Poor performance or damage from battery leakage could
result. Observe the cautions listed below.
• Do no mix old and new batteries, or different types of
batteries
• Pay attention to the polarity markings “+” and “–”, so
that you do not insert the batteries the wrong way
around.
• Do not use batteries after their recommended expiry
date.
• Do not leave a depleted batteries inside the instrument.
• Replace batteries only with the specified type.
• Remove the batteries from the instrument if it is to be
stored for a long time.
• The indicator flashes when the remaining battery capacity
is low. In this case, measurement is not possible. Replace the
batteries.
•
After use, always turn off the instrument.
• Although rechargeable batteries (nickel-hydride) can be used for
measurement, the battery level indicator will not be accurately
displayed.
• When replacing the batteries after cleaning, the replacement
should be carried out after the instrument has been completely
dried.
• The operating temperature of the batteries included in the
shipment is −10°C to 45°C (14°F to 113°F). When using the
instrument outside this temperature range, use batteries that can
support such a low or high temperature range. (Example: lithium
battery)
Battery warning indicator
Fully charged.
As the battery charge diminishes, black charge bars disappear,
one by one, from the left of the battery indicator.
The battery voltage is low. Replace the batteries as soon as
possible.
(Blinks) The battery is exhausted. Replace the batteries.
HIOKI FT6031B961-00