Hioki DT4281, Руководство по дистанционному управлению

Страница: 14 / 14

DT4281,DT4282 DIGITAL MULTIMETER Remote Operation Manual
P14/14
6. Compatible command with earlier products
Table.10 shows the command compatibility with earlier products 3800 series.
Table.10
Command Description
*CLS Clear the system Error Queue.
*RST Put the meter to power-on-reset state.
LLO Put the meter into the local lockout state when in remote control.
This means no local key operation at the front panel is allowed
during remote control.
GTL Put the meter into the local state, clearing the remote state and
front panel lockout.
FETC? [@2] Return the primary or secondary function value of output butter.
Response
：
<NR3>
Please note
-1. Contents subject to change without notice.
-2. This document contains copyrighted content.
-3. It is prohibited to copy, reproduce, or modify the content of this document without permission.