Hioki CM4001, Инструкция по эксплуатации

Страница: 17 / 22

17
Wireless Communications Function
Wireless Communications Function
When the Z3210 Wireless Adapter (option) is installed, the wireless communications function can
be used. Concurrent use of GENNECT Cross and the HID function (p. 20) is not available.
Using GENNECT Cross
Using GENNECT Cross allows you to check and record the measured data of the instrument and
create measurement reports using your mobile device.
For more information about this functionality, see the Help function in the GENNECT Cross
(application software, free of charge).
GENNECT Cross special site
• The communications range is approximately 10 m (line of sight). The communications range
varies significantly depending on the presence of obstructions (walls, metallic shielding, etc.) and
the distance between the floor (ground) and the instrument. To ensure the stable communication,
make sure that the radio wave intensity is sufficient.
• GENNECT Cross is free, but you may be subject to Internet data fees when downloading and
using the app.
• GENNECT Cross may not work properly on some devices.
• The Z3210 uses the 2.4 GHz band wireless technology. It may not be possible to establish
communications if there is equipment that uses the same frequency band, for example a wireless
network (IEEE 802.11b/g/n), nearby.
When the instrument is placed on the floor or ground, the communication distance
becomes shorter. It is recommended that you move the instrument from the floor or
ground and place it on a desk or table or hold it by hand.
HIOKI CM4001A963-00