Hioki CM4001, Инструкция по эксплуатации

Страница: 14 / 22

14
Simple Event Logging Function
Simple Event Logging Function
The instrument can update the maximum value display from the start to the stop of recording.
When the maximum value exceeds the set threshold value, the backlight flashes on and off in red
to warn.
1
Turn the instrument on while holding down the HOLD key and key simultaneously.
The HOLD key blinks.
2
Press the MAX/MIN key (

) or RANGE key (

) to select the threshold value.
3
Press the HOLD key.
The threshold value is confirmed, and the HOLD key blinks.
4
Press the MAX/MIN or RANGE key to enable or disable the filter function.
5
Press the HOLD key.
The filter setting is confirmed, and the [HOLD] symbol and the [rUn] segments blink on the display.
To change the threshold value
Press the MAX/MIN key or RANGE key to return to the threshold value selection
screen (step
2
).
6
Press the HOLD key.
The instrument starts event logging.
HIOKI CM4001A963-00