Hioki BT3562, Инструкция по эксплуатации

Страница: 184 / 228

8.8 Sample Programs
178
Shown below is a sample program which uses Visual Basic
®
2005 to enact RS-
232C communication, set the measurement conditions, read measurement
results and then save them to file. The sample program will be written in the fol -
lowing manner.
" Creation Procedure(Visual Basic® 2005)" (p.176) description
........................................................................... Write using sample program
Button created to begin measuremen .................................................Button1
Button created to close application .....................................................Button2
When the [ Begin Measurement ] is pressed, takes 10 measurements and writes
the measurement values to a [ data.csv ] file.
When the [ Quit ] button is pressed the program closes.
The following program is written entirely in [ Form1 ] code.
Sample Programs(Visual Basic
®
2005)
Imports System
Imports System.IO
Imports System.IO.Ports
Public Class Form1
‘
Perform process when Button1 is pressed
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim recvstr As String
Dim i As Integer
Try
Button1.Enabled = False '
Disable buttons during communication
...................... (a)
Button2.Enabled = False
Dim sp As New SerialPort("COM1", 9600, Parity.None, 8, StopBits.One) '
Communication port setting
.... (b)
sp.NewLine = vbCrLf '
Terminator setting
...........................................................(c)
sp.ReadTimeout = 2000 '
2 second time out
.......................................................... (d)
sp.Open() '
Open port
SendSetting(sp) 'BT3562-01 or BT3563-01
settings
FileOpen(1, "data.csv", OpenMode.Output) '
Create text file to be saved
.......................................... (e)
For i = 1 To 10
sp.WriteLine("
*
FETCH?") '
Begin measurement and read measurement
results command
............................................................ (f)
recvstr = sp.ReadLine() '
Read measurement results
PrintLine(1, recvstr) '
Write to file
Next i
FileClose(1) '
Close file
sp.Close() '
Close port
Button1.Enabled = True
Button2.Enabled = True
Catch ex As Exception
MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
'
Set measurement conditions
Private Sub SendSetting(ByVal sp As SerialPort)
Try
sp.WriteLine(":TRIG:SOUR IMM") 'Select internal triggering
sp.WriteLine(":INIT:CONT ON") 'Continuous measurement ON
Catch ex As Exception
MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
‘
Close program when Button2 is pressed
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Me.Dispose()
End Sub
End Class
HIOKI BT3562A981-09