Hioki 9636, Инструкция по эксплуатации

Страница: 15 / 22

7
―――――――――――――――――――――――――――
Chapter 3 3286 (-20) Settings
――――――――――――――――――――――――
NOTE
3.2 DATA OUTPUT SETUP Mode
is displayed, and the option setting reverts to
its default.
The digits may not flash, depending on the version
of software used for the 3286 (-20). When using a
version of software for which the digits do not flash,
use the
U/
or
I/
key to change the input type
setting.
The DATA OUTPUT function must be enabled in
the DATA OUTPUT SETUP mode.
The DATA OUTPUT SETUP mode also allows
setting the output type, output items and
communications parameters.
The RS-232C communications speed (item 2-04),
RS-232C data length (item 2-05), RS-232C stop bits
(item 2-06) and RS-232C parity bit (item 2-07)
must be set to be the same as printer settings.
1. To activate the DATA OUTPUT SETUP mode, hold
the
SET2
key while pressing the
POWER
key to
turn the 3286 (-20) on.
2. Select the appropriate settings. Use the
MODE
and
MAX/MIN
keys to increment and decrement the
item number, respectively. The communications
status display (item 2-03) is off by default. Items 2-
04 to 2-07 are displayed by setting the
communications status display to
.
3. Change the settings as needed using the
U/
and
I/
keys.
4. If needed, the settings can be returned to their
default values by pressing the
HOLD
key twice.