Hioki 9333, Инструкция по эксплуатации, Страница: 22 / 56

14
_____________________________________________________________________________________________
3.5 Receiving Waveform Data
______________________________________________________________________________________________
3.5 Receiving Waveform Data
You can transfer waveform data from memory in the Memory HiCorder to
the computer. The data is transferred as a file in the same format as in a
binary save to recording media on the Memory HiCorder.
Select Data Transfer, then Get/Save Waveform Data.
When the dialog box appears, enter the location (directory) to save the file
and the file name.
Next click Start, to start receiving the waveform data from the Memory
HiCorder.
While the data is being transferred, the progress is shown at the lower right
corner of the application window. When this bar reaches the right edge the
transfer is complete. (When transferring more than one file, the progress bar
wipes across for each set of waveform data.)
When the A/B cursors are present on the screen, only the section between
the cursors is transferred. When the cursors are not shown the whole of the
data is transferred: always check the cursors before sending.