Hioki 8420-51 Скачать руководство пользователя страница 15

Страница: 15 / 52

2.3 Waveform Screen

Display Marks

2.3 Waveform Screen

Sets the digital filter.

❖

See Section 4.7.

Switch the waveform display

screen. This is also possible with
the

button.

❖

See Section 6.2.

Shows the wave sheet of the wave-

form being displayed.

❖

See Section 5.1.9.

This indicates that a PC card is

inserted.

❖

See Chapter 7.

This indicates the method of chang-

ing channels for numeric display.

❖

See Section 6.3.

This indicates the power supply.

❖

See Section 2.3.

This indicates whether the speaker

is on or off for the alarm function.

❖

See Section 12.2.

Shows the data record-
ing interval.

❖

See Section 4.2.

This indicates scroll
mode.

❖

See Section 6.4.

❖

See Section 6.5.

❖

See Section 6.6.

This is the channel set-
ting window.
The

button turns the

display on and off.
The input channels can
be set in the waveform
display screen.

❖

See Section 6.1.

Shows the time axis.

❖

See Section 4.3.

This shows the waveform
range.

The

icon appears while

saving in real time.

❖

See Section 7.5.

The

icon appears while

printing in real time.

❖

See Section 11.2.2.

This shows the cur-
rent date and time.

This displays the
display channels.

Содержание 8420-51





















































Результаты поиска

Содержание 8420-51

Отзывы:

Похожие инструкции для 8420-51

Бренды по названию

Популярные бренды

Hioki 8420-51, Быстрый старт

Результаты поиска

Содержание 8420-51

Отзывы:

Похожие инструкции для 8420-51

Бренды по названию

Популярные бренды