Hioki 3255-50 HiTESTER Скачать руководство пользователя страница 7

Страница: 7 / 52

Safety Notes

Safety Symbols

Symbols

The following symbols in this manual indicate the
relative importance of cautions and warnings.

In the manual, the

symbol indicates particu-

larly important information that the user should
read before using the product.
The

symbol printed on the product indicates

that the user should refer to a corresponding topic
in the manual (marked with the

symbol) before

using the relevant function.
Indicates that dangerous voltage may be present
at this terminal.

Indicates a double-insulated device.

Indicates a grounding terminal.

Indicates DC (Direct Current).

Indicates AC (Alternating Current).

Indicates DC (Direct Current) or AC (Alternating
Current).

Indicates that incorrect operation presents an ex-
treme hazard that could result in serious injury or
death to the user.

Indicates that incorrect operation presents a sig-
nificant hazard that could result in serious injury or
death to the user.

Indicates that incorrect operation presents a pos-
sibility of injury to the user or damage to the prod-
uct.

Advisory items related to performance or correct
operation of the product.

Содержание 3255-50 HiTESTER





















































Результаты поиска

Содержание 3255-50 HiTESTER

Отзывы:

Похожие инструкции для 3255-50 HiTESTER

Бренды по названию

Популярные бренды

Hioki 3255-50 HiTESTER, Инструкция по эксплуатации

Результаты поиска

Содержание 3255-50 HiTESTER

Отзывы:

Похожие инструкции для 3255-50 HiTESTER

Бренды по названию

Популярные бренды