Himunication HM380 Series, Руководство пользователя

Страница: 30 / 43

Special Function of DISTRESS key & Real-time DSC
When sending distress message:
Pull the Distress key cover and press the Red key into “Distress Menu” selection. Select
current distress situation such as “Flooding”, then press and hold for 3 seconds, the selected DSC
message will be send. And this message will be resend within 4 minutes--
Press the “PAUSE” key to pause or resume the resend.
Press “SEND” to resend immediately.
Press the soft key below “Exit” icon to exit the current menu and shortly cancelation option of
selected DSC alerting will be given for confirmation.
When receiving distress message:
HM380 model has two receivers, one receiver used for receiving/transmit voice and another
receiver used to continually monitor 70 channels. The DSC function of HM380 is operated in
separate way which means any arriving DSC message will not be ignored even if you are using
HM380 for transmitting or receiving. If you want to check those messages, please press
“CALL/MENU” to enter “Receive Call Log” for checking all received DSC messages.
VOL
Short press “VOL” key and “VOL” icon will be shown on LCD, then press Up/Down key
or rotate “POWER” key to toggle as you wish.
TRIW/HAIL (Tri Watch/Hailer)
Short press “TRIW/HAIL” key can activate the TRI WATCH mode. Monitor CH16, current
channel and one programmed channels in cycle.
Long press “TRIW/HAIL” and enter “HAILER LISTEN MODE” for setup as you wish.
Sounds received through the horn can be heard through the radio speaker. Press and hold the PTT
key and speak your announcement. Release the PTT key to listen. (Hailer operation is only
available on the HM380S)
Squelch/MOB Key
Short press “SQL/MOB” key and “SQL” icon will be shown on LCD, then press Up/Down
key or rotate “POWER” key to toggle as you wish.
Long press “SQL/MOB” key will display this “please press 3 seconds Distress key to send
MOB distress call" on VHF, then Press Distress for 3 seconds, Distress call with nature MOB is
sent.
MOB mark is output by NMEA.Meanwhile a MOB mark is immediately sent to the chart
plotter to have a position as accurate as possible.
—
25
—